How to fit your Roman Blind

How to fit your Roman Blind

  1. Positioning your blind

Inside the Recess

Decide the position of the blind so that it will be clear of any latches or fixtures.

Othello Sage Roman Blind

Othello Sage Roman Blind

Outside the Recess

Decide the position so that the overlaps on both sides of the recess are equal.

White Roman Blind outside the recess

White Roman Blind outside the recess

  1. Fixing the brackets

The brackets are designed for face fixing or top fixing to the window frame, wall or ceiling. Blinds between 60cm – 120cm wide will have 2 brackets and blinds between 150cm – 180cm wide it will have 3 brackets.

  • Place the brackets evenly on the top of the headrail and snap into the spring locking mechanism.
  • Having decided the positioning of the blind put it into the desired position making sure it is centred and level.
  • Mark the location of each bracket with a pencil.
  • Remove each bracket from the headrail by pressing the plastic locking tab at the front of the bracket.
  • Place each bracket on its location markings and mark through the desired screw hole positions.
  1. Installing the blind

Press the headrail firmly up onto each bracket until the locking mechanism clicks.

Warnings

Please be aware of the dangers of the chain or cord control around children.

Care and Maintenance

To remove your headrail press the plastic locking tabs at the front of the brackets. The fabric is attached with a Velcro strip.